What are the differences in the use of laser cutting machines and laser engraving machines?

1. Note on the use of laser cutting machine:

(1) New job must be trained in professional skills to operate the laser cutting machine, familiar with the structure of the equipment, and fully grasp the basic operational knowledge.

(2) Strictly follow the safe operation rules of the laser cutting machine and start the machine according to the process.

(3) Protective equipment should be worn before operating the laser cutting machine to protect personal safety. Do not watch the laser beam with naked eyes for a long time.

(4) The surrounding environment of the laser cutting machine should be kept dry and tidy. It is forbidden to stack inflammable and explosive materials, and the fire-fighting equipment should be placed at your fingertips.

(5) If a mechanical failure occurs in the laser cutting machine during operation, the equipment should be shut down immediately and reported to the technician for troubleshooting.

(6) It is strictly forbidden for the operator to leave the post without authorization during the operation of the equipment, so as to avoid the laser cutting machine from coming out of the effective range or two accidents causing the accident.

(7) After the laser cutting machine system is turned on, it should be manually operated at low speed to check whether the X, Y axis and linear guide are abnormal.

(8) A small amount of testing should be performed before mass processing of unknown materials, and the operation should be recorded.

(9) The laser cutting machine should be regularly maintained for maintenance, and regularly check the lubrication of moving parts and the wear of consumables.

2, the use of laser engraving machine notes:

(1) The fulcrum of laser tube installation should be reasonable. The fulcrum should be at 1/4 of the total length of the laser tube. Otherwise, the laser tube spot pattern will be deteriorated. Some working spots will become several points for a period of time, causing the laser power to drop to meet the requirements. , resulting in constant change of management.

(2) The cooling system should be grounded, and the water tank and waterway should be cleaned frequently. The temperature control point of the cooling temperature control water tank should be reasonable. Otherwise, the laser tube will be easily damaged and the dew condensation power will drop, the cold head of the tube will fall off, the service life will be greatly shortened, and sometimes it will not work. Caused continuous change of management.

(3) Water protection should be checked and cleaned frequently. Cooling water often cannot be opened. Water protection float switch or water protection float switch is not reset. Short-circuit method cannot be used to solve the urgent need. The cooling water quality should be good. The aluminum oxide of the nozzle is too serious. It should be cleaned regularly for the water in the water pump and the water pipe and the water protection. Otherwise, the laser tube will burst or the cold head will fall off.

(4) The suction device should be regularly inspected and cleaned, and the fan duct should be cleaned up. Otherwise, a lot of smoke and dust will not be discharged, and the lens and the laser tube will be seriously and quickly contaminated, so that the mechanical and electronic components are easily oxidized and the contact is not good.

(5) Focusing mirror and mirror inspection. After working for a while, the frame will be hot, and the surface of the lens will be discolored and rusted; the film peeling and cracking are all objects to be replaced, especially for many customers using atmospheric pumps and air compressors. Water is quickly accumulated on the lens, so the cleaning and quality of the optical system of the lens (laser tube exit) must be checked on time.

(6) The working environment of the machine should not be too bad. If the ambient temperature is higher than 30 degrees and lower than 18 degrees, there is too much dust and serious air pollution, so the machine is seriously damaged and the failure rate is rising; the electrical accessories are very humid. Easy to go wrong. Therefore, we especially remind customers to improve the working environment and maintain the machine frequently.

(7) The power grid power should be matched. The power distribution and contact points of all parts of the whole equipment should be good (fan, water cooler, laser machine, laser power supply, computer should be powered independently).

(8) The working current of the laser tube should be reasonable, and it can not be used for 90-100 light intensity for a long time; it is necessary to rationalize the application of laser and save laser energy; the optical path system should be cleaned correctly, otherwise the laser tube will be prematurely aged and cracked, so the laser machine works. The strong response should be adjusted at 50-60% and then the working speed should be adjusted according to the material. This is the best working condition of the laser tube.

Advertising engraving machine relief software and operating software?

1, advertising engraving machine relief software: TYPE3, Artcam, carved, CAD, CDR, 3Dmax and so on.

2, advertising engraving machine operating software: generally developed by themselves, the latter directly asked third-party purchase, including Weihong control system, DSP controller control system, MARCH3 control system.

Advertising engraving machine relief software and operating software features?

1. Advertising engraving machine embossing software features: embossing software learning is slower than operating software, and there is a lot of knowledge to master.

2, advertising engraving machine operating software features: operating software is still relatively eager to learn, learn faster.

Advertising engraving machine relief software and operating software operation?

1. Advertising engraving machine embossing software operation: After opening Artcam, there are two options under “Generate Model”: generate new model and generate model through image. We choose to "generate the model through the image", and then select the graphic we need to sculpt. After selecting it, the system will prompt us to set the model size. We can adjust the height or width of the graphic below the image size, and the height in the Z direction is the overall depth of the relief. There are five points for the origin position to choose from. In general, we can choose the center or the lower left corner as the origin. After all the data is modified, click "Accept" to preview the 3D effect. Click on 3D View to preview the effect of the relief. If you feel the imbalance, you can re-edit the relevant size.

The next step is to generate the ad engraving machine program, which is what we usually call the tool path. Finding the “3D Toolpath” under the toolpath The first option is to machine the relief. Under the processing relief option we can select the tool, set the material, and finally click "now", the computer will automatically calculate the path. After the path is all saved, you can save it. Save the format and pay attention to it. Select “*.mmg”. Finally, the tool path can be loaded into the advertising engraving machine and processed.

2, advertising engraving machine operation software operation: taking Weihong system as an example

(1) Open the operation window

(2) Open the system parameters and click on the new window to open the big picture.

(3) Open the manufacturer parameters

The password is the NCSTUDIO final (mechanical) coordinate, which is entered according to the size of the bed.

The mm/pulse of the XYZ axis is entered according to the data calculated by your machine's wire guide. Here are a few common data. The lead of lead 3 is 0.001875. The wire lead with a lead of 5 is 0.003125. The wire lead with a lead of 10 is 0.00625.

The value of the response can be entered according to the lead of the machine's XYZ lead screw.

The take-off speed is 300. The uniaxial acceleration is set to 100-400 and the curve acceleration is set to 200. The curve acceleration should be half of the uniaxial acceleration. Other values ​​need to be set.