Stone engraving machine manufacturers introduce you to the role of water pump

    When the stone engraving machine manufacturer designs the engraving machine, it will design a water pump for the engraving machine. The position of the pump is generally close to the engine of the machine, which will be filled with clean water. Many people don't understand the role of the pump. They often ignore the pump when they use it, which causes a series of problems. Today, let me introduce it to you.
    Due to the engraving materials, the stone engraving machine has a relatively large power compared with ordinary machines, and the overall running speed of the machine is relatively fast, so the energy conversion of the machine will be fast.
    Everyone knows that in the process of using the machine, it is necessary to dissipate heat. If the heat dissipation effect and heat dissipation performance of the machine are not good enough, the machine may have many accidents, or an early warning, or even a flaw, which may occur more seriously. Security incident. The purpose of the pump is to cool the machine.
    There are two ways to cool down the engraving machine. One is not to continue to use it for a long time. The machine is stopped at a certain time, the parts are cooled and cooled, and the other is a water pump. The importance of the pump in the operation of the machine is very large. If there is no water pump, the engraving machine is generally difficult to maintain operation for more than three hours. If the water temperature in the pump becomes high, it is necessary to replace the cold water in time to ensure the cooling effect of the machine. .

Several major operating specifications for woodworking engraving machines

   As a kind of engraving machine, woodworking engraving machine mainly realizes automatic wood carving by mechanization, which brings higher efficiency to wood engraving. Similarly, as an engraving machine, it has its own operating specifications. If it does not conform to the specifications during operation, it is often prone to failures in use or a reduction in the service life of the machine.
    First of all, when using this engraving machine, it is necessary to understand that the engraving machine is used to engrave wood, that is to say not all materials can be engraved with this engraving machine, if used to engrave very hard materials, often Will damage the knife.
    Secondly, the engraving machine is large and small, the large engraving machine is used to engrave large parts, and the small engraving machine is used to engrave finer small parts, which are to be operated in different categories.
    Finally, the staff of the woodworking engraving machine manufacturer should pay attention to the performance check of the equipment when operating the engraving machine. Whether you are just starting out or using it for a while, check that the machine is working properly. If it is found that the machine is not working properly during the inspection, the personnel should be organized for immediate maintenance. In the process of operation, if the machine malfunctions, stop the operation of the machine immediately, contact the technician to check the fault, do not handle it yourself, otherwise it will easily enlarge the engraving machine.