First, the processing of the main parts of various FAG bearings:
1. The processing of the ferrule: The processing of the inner and outer rings of the FAG bearing varies depending on the raw material or the form of the blank. The process before the machining can be divided into the following three types. The whole processing process is: bar or tube Materials (some bar materials need to be forged and annealed, normalized)----Car processing----heat treatment----grinding----finishing or polishing----final inspection of parts--- -Anti-rust----Warehouse----(to be equipped with a package)
2. The processing of the steel ball, the processing of the steel ball also varies according to the state of the raw material, wherein the process before the frustration or the photosphere can be divided into the following three types, the process before the heat treatment, and can be further divided into the following Two kinds, the whole processing process is: bar material or wire cold punching (some bars need to be punched and annealed after cold pressing)----frustration, rough grinding, soft grinding or light ball----heat treatment- --- Hard grinding----fine grinding----finishing or grinding----final inspection group----rust prevention, packaging----into the warehouse <to be combined with the package>.
3. The processing of the roller during the processing of the roller varies according to the raw material. The process before the heat treatment can be divided into the following two types. The whole processing process is as follows: the bar processing or the cold rolling of the wire after the string ring and the soft grinding ----Heat treatment----string soft point----grinding outer diameter----grinding end face----finishing end face----fine grinding outer diameter----finishing outer diameter ---- Final inspection group----rust prevention, packaging----into the warehouse (to be combined with the package).
4. Processing of the cage The processing of the cage can be divided into the following two categories depending on the design structure and raw materials:
(1) Sheet → shear → punching → stamping forming → shaping and finishing → pickling or shot peening or stringing → final inspection → rust prevention, packaging → storage (to be combined)
(2) Processing process of solid cage: The processing of solid cage varies according to raw materials or gross damage. The following four types of blanks can be divided into the following processing: The bar is Pipe, forgings, castings----car inner diameter, outer diameter, end face, chamfering----drilling (or pulling holes, boring)----pickling----final inspection---- Anti-rust, packaging----into the warehouse.
Second, the assembly process of rolling FAG bearings:
Rolling FAG bearing parts such as inner ring, outer ring, rolling element and cage, etc., after passing the inspection, enter the assembly shop for assembly, the process is as follows:
Parts demagnetization, cleaning → internal and external rolling <ditch> lane size grouping → joint set → check clearance → riveting cage → final inspection → demagnetization, cleaning → rust prevention, packaging → into the finished product warehouse (boxing, shipping 〉.
For more information and purchase please visit: https://www.supplyforever.com
