In the workshop of the woodworking engraving machine, the dusty state is often inside. In this environment, the physical health of the staff is not good. If the dust accumulates, the life of the woodworking engraving machine will be greatly affected. . Therefore, it is very important to work on woodworking engraving machine dustproof. However, in the process of carving wood, there are many ways to do dustproof work. Next, follow the CNC network Xiaobian to learn about the dust-proof skills of woodworking engraving machine.
First of all, we must start with the production equipment and choose reasonable mechanical equipment, so that it can have a certain dust-proof effect. The dust-proof equipment is also indispensable. When choosing, we must consider the degree of purification, so that it can play a certain role in dust prevention. effect. Generally, the sound-absorbing cotton is used as a box body, which is soundproof and dustproof, and then a mouth-and-mouth vacuum cleaner is taken, and it is taken once every other time.
Wear glasses and masks when working, so that you can protect your glasses and respiratory organs from dust and dust. There is no such thing as a large dust-proof device, but a vacuum cleaner can be installed on the machine itself, which also has a good effect and protects the health of the operator.
When the engraving machine is used, it will produce a lot of dust. To eliminate the dust pollution fundamentally, it is necessary to take the comprehensive management route, start with the production equipment, and select advanced and reasonable mechanical equipment, supplemented by certain dustproof and dustproof measures. However, under the current conditions, the most effective measure is to choose dust-proof equipment.
The choice of dustproof equipment should consider the degree of purification required by the operation site and the nature of the dust. Large-scale wood dust and medium-sized wood dust can be collected on site in time, and for all kinds of fine wood dust with the most serious damage, the traditional effective method is to collect by using pneumatic dust collecting device or bag vacuuming equipment.
Proper use of the engraving machine dust cover can extend its service life. Let's share the common sense that you must know when using the engraving machine dust cover. First of all, check every day to remove all kinds of chips and other objects on the surface, prevent the accumulation of debris, check whether the running track meets the lubrication requirements, and prevent the damage caused by the huge friction caused by the lack of lubrication. Is it very smooth, with or without scratches, as the basis for early detection, these problems are good to repeat before the afternoon of work, these work is the focus of the day, I hope to attract everyone's attention.
Secondly, the content of regular inspection is mainly the inspection of the engraving machine organ dust cover to prevent dust and abrasive particles from sticking to the surface of the cooling pipe. If these things exist, it will affect the service life of the screw and the precision of the work, resulting in the product. If it is unqualified, if the damage of the screw guard cover is found during the inspection, it should be repaired in time. When the damage is serious, it should be replaced in time. After the end of each work, the remaining water in the water tank is cleaned with a dry cloth. Machine.
